Hints
and running up your score/stats
Create your own juggernaut school/team. Edit the roster so your team is filled with studs. Enter season mode with your team and under the preseason options, schedule as many 1-AA teams as possible. Set your playing time for 15 minutes and enjoy the ride. If you have the unlimited time-out cheat, you can use it here and stop the clock after any play finishes in-bounds. This will give you more time to compile stats. Note: Doing this may increase your game time to over 90 minutes (and possibly 120) of "real-time". If you are going to use the time-out cheat, take a 15-minute break when you hit the half time point of your game. Also, note that campus challenge points are awarded based on your level of play. Heisman is the hardest level, but you also get increased value on your campus challenge credits.
Maximum player status
Select "Rosters" in the options menu, then "Edit Player". Select their ratings icon and you can change every column up to 99.
All out team
Go to the rosters and select any created or a regular team. Select the players. This will give you a list of selections. Select ratings, and from there you can pump up your player. You can also select the appearance and make him tall and big. It may take awhile, but you could pump up your entire team. This requires patience. Choose practice mode to try the team.
Cause fumble on kickoffs
To to make your opponent fumble the ball on kickoffs, keep kicking to the same player. Eventually he will fatigue and start fumbling the ball in the third and fourth quarters. You can also kick to the other side of the field and try to surprise the other receiver. If you catch him off guard, he will sometimes fumble.
Get ball on kickoff
Use the following trick to get you the ball 95% of the time on kickoff. Set the game to easy play with penalties off, then choose the onside kick. Move the kick off arrow all the way left and down. You will hardly kick the ball -- only get the power to the end of the yellow line (it is acceptable if it goes slightly past), then hit the button again and try to get it in the yellow.
When playing a human player, call for Kickoff Left/Right then, which ever you choose, set to kick the ball in that direction. However, make it go as far up as possible. After the ball is kicked your team will run to where the ball will land. If you play the CPU, they will almost always call for a fair catch. The ball does not have to touch anyone on the return team. You can run up and catch it (if the kick is powerful enough).
Kickoff inside ten
Make sure that your kicker can at least make it to the endzone on kickoff. Then, go to the settings section and change all the penalties to off. When you kick it off, kick the ball at maximum power, let the bar go, and press it again. You should kick it to the left of the endzone out of bounds inside the ten yard line. Where it goes out of bounds at is the location where the other team will start at.
Use the following trick to get the kick returner inside the ten yard line. Select "Onside Kick". Point it all the way up and to the right. Stop the meter at the top and then in the yellow. The ball will go over the returner's head and stop at about the 5 yard line. He will run a sort distance then get tackled immediately.
Easy receiving
If you throw the ball to one of your receivers repeatedly, the defense will start double teaming that player, making it nearly impossible to throw to him. When they start playing extra defense on him, go to the depth chart and switch him to a different receiving position. For example, if he was the first string, put him at second; if he was second string, put him at first. He will still be in the plays, but on the other side of the field with one single man coverage, so you can keep running up the score. Repeat this again if they start the coverage.
Choosing "All Right" in the Ace-Y-Twins package twice in a row can be helpful. The first time, throw to your wide receiver. The next time, throw to the running back. He will usually be open for a gain of five or more yards.
Easy plays
Go to "Settings", then go down to "AI Settings". Put it on "CPU" and set their offense and defense all the way down. Then, switch it to "Human" and put your offense and defense all the way up. This should make plays very easy.
Get the ball possession back
Enter the game settings screen and turn penalties off. Play a game. When you kick off to the other team, do an onside kick. When you kick it, quickly jump on the ball. Note: This may take some practice.
Easy pennants
Create numerous profiles and get your five pennants at the beginning. Then, risk your pennants against the other controller. Set the game to overtime and no wind, and kick a FG with the profile you want to win the pennants. When the other team gets the ball, punt and its all over.
Pump up or silence crowd
Click the Left Analog-stick to pump up or silence the crowd.
Announce names instead of numbers
If you would like to hear the announcers call out your teams names rather than their numbers, all you have to do is put their roster in. Go to the options screen, go to "Edit Rosters" and insert the names under "Player Info". After you insert them, play a game and your team's names will be announced.
Other announced team names
The following NCAA I-AA team names will be recognized and announced by both the press box announcer and TV commentator if placed in the "Nickname" slot in the create a school option:
During season mode, change your schedule to play the number one ranked team, then the number two ranked team, then the number three ranked team. If you cannot defeat them during game play, switch over to their team and intentionally make mistakes and cause safeties for the other team. Allow your original team to score touchdowns and to win the game. You can go undefeated through the season.
Easy rival trophies
Go to the settings menu and turn the length of the quarters to one minute. On average for most teams, it takes more than one minute to drive down the field. If you get the ball first, go ahead and score. Just hold the team you are playing. If you do not get the ball first, hold your opponent or let them score. Then when you score, go for two. The simple iso in goalline always works. Since the game will take no more than ten minutes, you can get several trophies in an hour.
Go to the settings menu and set it to overtime. Just stop the other team, win in overtime, and you will get the trophy.
Change the game clock to one minute. Set the game on easy play. Kick an onside kick, put the arrow to the ground and to your side, kick as weak as possible, then recover. Do this after drives so you never have to play defense.
An easy way to win trophies is to set the game on overtime and junior varsity. All you have to do is hold the opposing team and score a field goal or touchdown and you will win the trophy. Save your profile to keep the trophy in your showcase.
Easy trophies in Dynasty
Create twelve teams. Make all of them juggernauts and increase all of their players' stats very high. After you have made all of the teams, go to dynasty mode and sign on the twelve teams you created. Then, if desired, change all of their schedules so that they play all the top ranking teams. Your created juggernaut teams will rarely lose. Simulate the entire season. For better measures, put all of the teams in a different conference so that at the end of the season you will get all conferences, most of the bowl games, the Heisman trophy, and all the individual trophies. You will not always get all trophies, as the season stats and games will vary each year, but you will defiantly get the bulk of them.
Get created players during Dynasty
At the end of every season in Dynasty, just after the last bowl game, save the game. Then, go to create a prospect. Make your prospect as desired, then save the game again. Then, go into players leaving. Note: You can skip this option if desired. Go to scouting. Go directly to the 100 blue chips in the country list, and see if your prospect made your team his first option. If not, back out all the way to the beginning, load the game, and try again. You will usually get three to four different outcomes. Keep doing this throughout the week you advance and you are still one or two on his list. Make sure you save the game -- sometimes they will pick the last person on their list, or if your team is already stacked, they will go to your rival with the weakest link in their position.
Use player during redshirt year
You can use a player during a redshirt year, thereby getting an extra year out of them. During the pre-season (after finishing recruiting, training, etc., but before playing the first game) you should have the option "Preseason Options". If not, you have already started the season. Go to the depth chart and take the player you are going to redshirt and move him to a non-starting position. Then, go to formation subs and put the player back at his position in every formation. Now redshirt him. The game will tell you that he has been removed form the depth chart. Start a game in the season. He should be in every formation you subbed him into.
Create your own juggernaut school/team. Edit the roster so your team is filled with studs. Enter season mode with your team and under the preseason options, schedule as many 1-AA teams as possible. Set your playing time for 15 minutes and enjoy the ride. If you have the unlimited time-out cheat, you can use it here and stop the clock after any play finishes in-bounds. This will give you more time to compile stats. Note: Doing this may increase your game time to over 90 minutes (and possibly 120) of "real-time". If you are going to use the time-out cheat, take a 15-minute break when you hit the half time point of your game. Also, note that campus challenge points are awarded based on your level of play. Heisman is the hardest level, but you also get increased value on your campus challenge credits.
Maximum player status
Select "Rosters" in the options menu, then "Edit Player". Select their ratings icon and you can change every column up to 99.
All out team
Go to the rosters and select any created or a regular team. Select the players. This will give you a list of selections. Select ratings, and from there you can pump up your player. You can also select the appearance and make him tall and big. It may take awhile, but you could pump up your entire team. This requires patience. Choose practice mode to try the team.
Cause fumble on kickoffs
To to make your opponent fumble the ball on kickoffs, keep kicking to the same player. Eventually he will fatigue and start fumbling the ball in the third and fourth quarters. You can also kick to the other side of the field and try to surprise the other receiver. If you catch him off guard, he will sometimes fumble.
Get ball on kickoff
Use the following trick to get you the ball 95% of the time on kickoff. Set the game to easy play with penalties off, then choose the onside kick. Move the kick off arrow all the way left and down. You will hardly kick the ball -- only get the power to the end of the yellow line (it is acceptable if it goes slightly past), then hit the button again and try to get it in the yellow.
When playing a human player, call for Kickoff Left/Right then, which ever you choose, set to kick the ball in that direction. However, make it go as far up as possible. After the ball is kicked your team will run to where the ball will land. If you play the CPU, they will almost always call for a fair catch. The ball does not have to touch anyone on the return team. You can run up and catch it (if the kick is powerful enough).
Kickoff inside ten
Make sure that your kicker can at least make it to the endzone on kickoff. Then, go to the settings section and change all the penalties to off. When you kick it off, kick the ball at maximum power, let the bar go, and press it again. You should kick it to the left of the endzone out of bounds inside the ten yard line. Where it goes out of bounds at is the location where the other team will start at.
Use the following trick to get the kick returner inside the ten yard line. Select "Onside Kick". Point it all the way up and to the right. Stop the meter at the top and then in the yellow. The ball will go over the returner's head and stop at about the 5 yard line. He will run a sort distance then get tackled immediately.
Easy receiving
If you throw the ball to one of your receivers repeatedly, the defense will start double teaming that player, making it nearly impossible to throw to him. When they start playing extra defense on him, go to the depth chart and switch him to a different receiving position. For example, if he was the first string, put him at second; if he was second string, put him at first. He will still be in the plays, but on the other side of the field with one single man coverage, so you can keep running up the score. Repeat this again if they start the coverage.
Choosing "All Right" in the Ace-Y-Twins package twice in a row can be helpful. The first time, throw to your wide receiver. The next time, throw to the running back. He will usually be open for a gain of five or more yards.
Easy plays
Go to "Settings", then go down to "AI Settings". Put it on "CPU" and set their offense and defense all the way down. Then, switch it to "Human" and put your offense and defense all the way up. This should make plays very easy.
Get the ball possession back
Enter the game settings screen and turn penalties off. Play a game. When you kick off to the other team, do an onside kick. When you kick it, quickly jump on the ball. Note: This may take some practice.
Easy pennants
Create numerous profiles and get your five pennants at the beginning. Then, risk your pennants against the other controller. Set the game to overtime and no wind, and kick a FG with the profile you want to win the pennants. When the other team gets the ball, punt and its all over.
Pump up or silence crowd
Click the Left Analog-stick to pump up or silence the crowd.
Announce names instead of numbers
If you would like to hear the announcers call out your teams names rather than their numbers, all you have to do is put their roster in. Go to the options screen, go to "Edit Rosters" and insert the names under "Player Info". After you insert them, play a game and your team's names will be announced.
Other announced team names
The following NCAA I-AA team names will be recognized and announced by both the press box announcer and TV commentator if placed in the "Nickname" slot in the create a school option:
BeaversThe following non-NCAA I-AA names will also be recognized and announced by both the press box announcer and TV commentator if placed in the "Nickname" slot in the create a school option:
Bison
Black Bears
Blackbirds
Bluejays
Broncos
Buccaneers
Bulldogs
Cardinals
Colonels
Comets
Crusaders
Explorers
Flames
Gamblers
Generals
Giants
Grizzlies
Hilltoppers
Huskies
Jaguars
Lumberjacks
Marauders
Minutemen
Mustangs
Outlaws
Panthers
Patriots
Peacocks
Pride
Racers
Rams
Red Devils
Redbirds
Saints
Seahawks
Seawolves
Sharks
Skyhawks
Spiders
Terriers
Thunderbirds
Tigers
Tribe
Wildcats
GreyhoundsEasy season mode
During season mode, change your schedule to play the number one ranked team, then the number two ranked team, then the number three ranked team. If you cannot defeat them during game play, switch over to their team and intentionally make mistakes and cause safeties for the other team. Allow your original team to score touchdowns and to win the game. You can go undefeated through the season.
Easy rival trophies
Go to the settings menu and turn the length of the quarters to one minute. On average for most teams, it takes more than one minute to drive down the field. If you get the ball first, go ahead and score. Just hold the team you are playing. If you do not get the ball first, hold your opponent or let them score. Then when you score, go for two. The simple iso in goalline always works. Since the game will take no more than ten minutes, you can get several trophies in an hour.
Go to the settings menu and set it to overtime. Just stop the other team, win in overtime, and you will get the trophy.
Change the game clock to one minute. Set the game on easy play. Kick an onside kick, put the arrow to the ground and to your side, kick as weak as possible, then recover. Do this after drives so you never have to play defense.
An easy way to win trophies is to set the game on overtime and junior varsity. All you have to do is hold the opposing team and score a field goal or touchdown and you will win the trophy. Save your profile to keep the trophy in your showcase.
Easy trophies in Dynasty
Create twelve teams. Make all of them juggernauts and increase all of their players' stats very high. After you have made all of the teams, go to dynasty mode and sign on the twelve teams you created. Then, if desired, change all of their schedules so that they play all the top ranking teams. Your created juggernaut teams will rarely lose. Simulate the entire season. For better measures, put all of the teams in a different conference so that at the end of the season you will get all conferences, most of the bowl games, the Heisman trophy, and all the individual trophies. You will not always get all trophies, as the season stats and games will vary each year, but you will defiantly get the bulk of them.
Get created players during Dynasty
At the end of every season in Dynasty, just after the last bowl game, save the game. Then, go to create a prospect. Make your prospect as desired, then save the game again. Then, go into players leaving. Note: You can skip this option if desired. Go to scouting. Go directly to the 100 blue chips in the country list, and see if your prospect made your team his first option. If not, back out all the way to the beginning, load the game, and try again. You will usually get three to four different outcomes. Keep doing this throughout the week you advance and you are still one or two on his list. Make sure you save the game -- sometimes they will pick the last person on their list, or if your team is already stacked, they will go to your rival with the weakest link in their position.
Use player during redshirt year
You can use a player during a redshirt year, thereby getting an extra year out of them. During the pre-season (after finishing recruiting, training, etc., but before playing the first game) you should have the option "Preseason Options". If not, you have already started the season. Go to the depth chart and take the player you are going to redshirt and move him to a non-starting position. Then, go to formation subs and put the player back at his position in every formation. Now redshirt him. The game will tell you that he has been removed form the depth chart. Start a game in the season. He should be in every formation you subbed him into.
What's new:
- NieR: Automata PlayStation 4
- The Legend of Zelda: Breath of the Wild Wii U
- New York Mysteries: High Voltage PC
- The Legacy: Forgotten Gates PC
- Mario Sports Superstars 3DS
- LEGO Worlds PlayStation 4
- Blaster Master Zero 3DS
- Fire Emblem Heroes Android
- Dark Romance: The Swan Sonata PC
- Disc Jam PC
- Dragon Age: Inquisition - Game of the Year Edition PC
- Eventide 2: The Sorcerer's Mirror PC
- Eventide: Slavic Fable PC
- Ghost Blade HD PC
- Labyrinths of the World: Changing the Past PC
Search for a game:
Platform: